Does Versachem muffler weld work?

Does Versachem muffler weld work?

5.0 out of 5 starsYes, it actually works. I had a few small holes from a rusty midpipe with cat in my car. The welder kept blowing bigger holes so I tried to use copper RTV but it wouldn’t stick to the rusty pipe.

How strong is muffler cement?

MufflerSeal Muffler Cement is a metal containing paste that prevents and seals leaks at seams and gaps of pipe and exhaust connection points. When fully cured, this paste dries to a cement-like hardness that is heat resistant up to 850⁰ F.

How long does Versachem muffler weld take to cure?

I let it sit for 48 hours, and have been driving with it for about 2 weeks; it’s so far held up perfectly.

How much does it usually cost to weld a muffler?

Typical costs: Minor muffler repairs (such as welding a loose but still functioning muffler back in place or fixing broken clamps) can cost $30-$500 or more, depending on the specific work done and local labor rates. CostHelper Readers report paying $40-$300 for muffler repairs, at an average cost of $138.

Can you repair a hole in a muffler?

“If you have a hole or a crack in your muffler, you definitely need to replace it. Even a small hole cannot be welded because the metal on a muffler is too thin,” Hrovat says. “If it is already corroded or rusted, it can’t be welded.”

What’s the best exhaust paste?

Top 10 Reviews on the Best Exhaust Sealant

1. Permatex Exhaust Pipe Sealing Compound.
2. J-B Weld Exhaust Pipe Sealant.
3. BlueDevil Exhaust Gasket Sealer.
4. Gasgacinch Exhaust Seal Joint and Crack Sealer.
5. CRC Exhaust Sealer.
6. Loctite Exhaust Sealant.
7. Powermaster Exhaust Joint Sealant.
8. Blue Magic Exhaust Leak Sealant.

Is JB Weld good for exhaust?

JB Weld ExtremeHeat is perfect for making repairs on all manner of high-heat parts, including exhaust manifolds, mufflers, catalytic converters, exhaust pipes, engine blocks, fireplaces, smokers/fireboxes, and many more crack-prone items.

How long does muffler patch last?

Click here to visit our locations page. Typically, a standard factory-issued muffler should last around three to five years.

How long does JB weld exhaust take to dry?

A full cure is reached in 15-24 hours. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight.

How long does welding a muffler take?

It takes as long as it takes. The actual welding process takes about 20 minutes under ideal conditions. When welding on an old exhaust system, conditions are rarely ideal.

Can you weld your muffler back on?

Two common installation methods are used for attaching a new muffler to a vehicle. The part may be bolted or welded in place.