How do I configure my broadband modem?

How do I configure my broadband modem?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How do I configure my broadband IP address?

Windows Me, 98, or 95

  1. Click Windows Start, Settings, Control Panel.
  2. Double-click the Network icon.
  3. Click the Configuration tab and select the TCP/IP item that has been assigned to your network card.
  4. Click the Properties button.
  5. Configure IP addressing:
  6. Click OK.

Can I access modem settings?

How to Access Modem Settings. Overwhelmingly, today’s modems include built-in wireless networking, and if you have this, you can access your settings page on any device connected to your home network. If you don’t have wireless networking, you will need to use a computer with a wired connection to your network.

What is the difference between dynamic IP and PPPOE?

DHCP is a protocol for obtaining IP addresses while PPPOE is a common method of connecting to an ISP. DHCP is very popular and is widely used while PPPOE is slowly falling out of favor. You would need to have a username and password with PPPOE while the configuration of DHCP is automatic.

What is dynamic IP address?

A dynamic IP address is an IP address that an ISP lets you use temporarily. If a dynamic address is not in use, it can be automatically assigned to a different device. Dynamic IP addresses are assigned using either DHCP or PPPoE.

What is my broadband IP address?

From the Start menu, right-click My Network Places, and then click Properties. To view the IP address of a wired connection, double-click Local Area Connection and click the Support tab, then click Details and the window that appears will display the IP address.

Should I choose PPPoE or DHCP?

Should I use PPPoE or static IP?

Yes PPPoE is an authentication standard to use with DHCP ( dynamic host control protocol ) which is where your IP address is dynamically assigned and can change frequently. A static ip is a IP address that is sold for you and you only to use so it won’t change.