How do you measure for a high back wheelchair?
Measure vertically from the bottom of the buttocks up to the collarbone. The average wheelchair back height is 16 inches. The backrest height will ultimately depend on the user, if they have trouble sitting upright, they might want a lower back.
What are the dimensions of a wheelchair?
A typical wheelchair has a length of 42” (106.7 cm), a height of 36” (91.4 cm), seat heights around 19.5” (49.5 cm), and a width of 25” (63.5 cm).
What is a high back wheelchair?
A high-back reclining wheelchair typically has a higher than standard chair-back with an independent reclining functionality allowing the user to recline from a 90 degree sitting position to a 180 degree position, enhancing repositioning and comfort while also helping to improve blood flow.
Are there different heights of wheelchairs?
Regular wheelchairs don’t vary much in height selection and is usually 19″ to 20″ high. For lightweight and custom wheelchairs, the heights can vary from as low as 14″ up to as high as 21″.
How do you measure backrest height?
Backrest Height; The inferior angles of the scapula should be approximately 1 finger-breadth above the back when the user sits with erect posture. It is determined by measuring the distance between the seat of the chair to the patient’s axilla, and subtracting four inches.
How wide does a doorway need to be for a wheelchair?
32 inches
Doorways need to be wide enough to ensure ample space for a wheelchair to maneuver through openings. Some codes require 34-inch-wide exterior doors and 32-inch-wide interior doors. The Americans with Disabilities Act (ADA) requires doorways to have a minimum of 32 inches of width with the door open.
What are 3 important wheelchair measurements?
What Size Wheelchair Should I Get?
- Seat Width. One of the most crucial measurements you want to get right is the seat width.
- Seat Depth. Closely following the width in regard to importance is the wheelchair seat depth.
- Seat Height.
- Backrest Height.
- Seat Angle.
- Armrests.
- Leg Rests.
What is a reclining back wheelchair?
Reclining Wheelchair The reclining wheelchair will transform the user from a sitting position to a close to lying down position. The change of position reduces pressure on the buttocks and allows the user to take a break from sitting in the same position.
How much does a high back wheelchair weigh?
| Max Weight Capacity | Drive Range | Product Weight |
|---|---|---|
| up to 450 lbs. | up to 12 miles | 209 lbs. |
What is the standard height of a wheelchair?
18″ to 20″
Standard seat-to-floor height for a wheelchair is 18″ to 20″. Hemi-Height is 17.5 to 18.5- inches and varies somewhat with manufacturers.
What are the dimensions of most wheelchairs?
Much like a piece of clothing, a wheelchair user needs to find the right fit for their chair. However, the typical wheelchair is around 36 inches tall, 25 inches wide and 32 inches long. The main considerations are height and width, as these are the most likely dimensions to affect your ability to navigate freely.
