What is the sill of a window?

What is the sill of a window?

A window sill, also known as a window ledge or window bottom, is the shelf-like, flat piece of the window trim found at the base of the window. Window sills are important to the design and functionality of the window.

What is the difference between a window sill and a window ledge?

a window sill is on the inside and a window ledge is on the outside. In a residence or single family dwelling there’s usually no difference. In old construction there’s a very substantial board at the bottom, tilted outward to allow rainwater to drain.

What is the outside window sill called?

What is a Stool? The window stool is the part of the window commonly called the window sill.

Which is correct cill or sill?

So, both spellings are correct although the most common usage is sill and not cill. As an example, if you search the web for the word cill on Google the search engine will display a box with the spelling sill.

What is the purpose of sill?

A window sill (also written windowsill or window-sill, and less frequently in British English, cill) is the horizontal structure or surface at the bottom of a window. Window sills serve to structurally support and hold the window in place.

What is the concrete part under a window called?

The window frame and its parts consists of a head at the top, jambs down the side, and a sill or cill at the bottom, plus, where used, a separating upright called a mullion, and a horizontal separator called a transom.

What are parts of window called?

The frame is the outermost area, or casing of the window, and inside it are the sash and the glass. The sash is the area inside the frame, the part that holds the glass. For example, on a single-hung window, the piece you slide to open the window is the sash.

What is a cill?

a shelf at the bottom of a window inside a room. 2. a horizontal piece along the outside lower member of a window, that throws water clear of the wall below. 3. the lower horizontal member of a window or door frame.

What is a cill on a door?

The cill is the part at the bottom of the door that projects out. The cill’s main purpose is to take rain water away from brickwork underneath. Decking and patio slabs can be laid over the cill and up to the edge of the threshold if required.

Do new windows include sills?

Normally the external sill is an addition but unless a window frame is being fitted into an apperture with a concrete sill, or with creasing tiles or similar in situ they should always be fitted WITH an external sill and concealed drainage. In most cases, when you have windows replaced this usually includes a new cill.

Where to buy window sill?

Pre-primed finger jointed wood ready for paint

  • Elegant traditional profile shape
  • Mounts to window jamb at base and acts like a shelf
  • Helps to catch the rain when the window is left open
  • Sold and priced by the linear foot
  • Note: Product may vary by store
  • California residents see Prop 65 WARNINGS
  • What type of wood is best for a window sill?

    Tools and Materials. Wood – I used a glued up board of ash.

  • Measure and Cut. I measured the opening where the sill will be.
  • Adding the Chamfer. I do not really know if this step is a must.
  • Round Over the Edges. This is really a personal preference.
  • Sand and Finish.
  • Install.
  • The End.
  • What do you need to know about window sills?

    The current design is slightly damaged and the common general lovely look is lost. To repair the window sill is not a solution in this case.

  • The integrity of the product is violated,which may shortly lead to its total break;
  • It does not fit into the interior of the room,or we need the wider one to sit on,for example.
  • How low can you go with a window sill?

    How low can you go with a window sill? In occupancy groups R2 and R3, single-family, semi-detached, and multi-family homes where the active window railing opening is greater than 72 inches (1829 mm) above the finished level or other surface below, the bottom of the window opening must be be at least 610mm above the finished floor surface of the