Guidelines

What tools do you need to take apart a PS3 Slim?

What tools do you need to take apart a PS3 Slim?

Tools Featured in this Teardown

  1. Phillips #1 Screwdriver.
  2. Spudger.
  3. T8 Torx Security Bit Screwdriver. $5.99.

What screwdriver do you need to take apart a PS3?

Use the Torx Screwdriver (T8 or T10) to remove the torx screw from the space behind the rubber foot. This screw has a security bit but most are able to remove it successfully with a normal Torx driver.

What screwdriver Do you need to open a PlayStation?

To disassemble the PS4 you will need two types of screwdrivers:

  1. Torx T8 / T9.
  2. Phillips PH0 / PH1 Also.
  3. Tweezer – will be useful.

What tools do I need to open PS3?

If you want to open your PS3, then you need a tamper resistant torx size 10 screwdriver to remove the first screw. After that, the rest of the screws require a standard phillips screwdriver.

How do you clean the inside of a PS3 Slim?

Open it all the way to access the inside of your machine. Clear dust out of the power supply with compressed air and paper towels. Wipe away any visible dust with a dry paper towel. Use a can of compressed air with a thin nozzle attachment to spray air in the hard-to-reach areas and blow out the dust or grime.

What is PS3 torx?

10cm T8 security torx star head screwdrivers. Ideal tool kit for repairing or modding a controller.

How do you open a PlayStation Slim?

It is easy; just pry up on the two corners of case with your fingers. The next step is to remove the power supply of the PS4 slim. Remove the three screws with a PH0 screwdriver. Next, using T8 Torx screwdriver unscrew three screws and remove the metal panel.

What is PH0 screwdriver?

These prefixes are typically followed by a number that indicates bit size. For example: PH2 – (Phillips #2) A large Phillips bit. PH0 – (Phillips #0) A medium Phillips bit. PH000 – (Phillips #000) A small Phillips bit.

How do you open a torx without a screwdriver?

How to Unscrew a Torx Screw Without a Screwdriver

  1. Use a plastic toothbrush. Similar to its use on both Phillips and flat head screws, a plastic toothbrush can also be used to remove a Torx screw. …
  2. Use a small flat head screwdriver. …
  3. Break out the pin for security Torx screws.