Does Bosch make good O2 sensors?

Does Bosch make good O2 sensors?

But our top pick for you is Bosch 17025 Oxygen Sensor is the best-selling brand in the world of oxygen sensors. They are highly durable as they can run 60,000 miles before you need to replace them and provide you with the maximum efficient performance of all the brands we have mentioned here.

How long do Bosch oxygen sensors last?

60,000 to 90,000 miles
Oxygen sensors have a limited lifespan. In the early days, Bosch could only keep the sensors alive for an hour. Thankfully, the lifespan today is much longer. Even still, the lifespan of a modern O2 sensor may be 60,000 to 90,000 miles.

What thread is Bosch O2 sensor?

M18 x 1.5mm
The thread is an M18 x 1.5mm pitch. Works with Bosch LSU4. 2, Bosch LSU4.

What is the difference between bank 1 and bank 2 on O2 sensor?

Brian, the questions I am asked most often about O2 sensors is how do you know what is Bank 1 or Bank 2, which O2 sensor is Sensor 1 or Sensor 2. Bank One is always the bank where cylinder number one is located. On the Corvette it will always be the driver side. Bank Two is the passenger side.

Which O2 sensor is better Denso or Bosch?

A lot of Asian-made vehicles come with Denso as OEM, actually. Bosch oxygen sensors are a better fit for European vehicles. The brand’s sensors are also thicker, “fatter” than other aftermarket manufacturers. In many cases, they are also cheaper.

Are Bosch and Denso the same?

Bosch owns 5 percent of Denso. Bosch, which is based near Stuttgart, makes electronics, brakes, chassis systems, motors, navigation systems and other parts. In 2009, Bosch’s global sales to automakers fell 24 percent to $25.62 billion. Denso’s fiscal-year sales rose 3 percent to $28.73 billion.

Can you clean O2 sensors?

There are no true oxygen sensor cleaners that are safe to put through your engine. While some people choose to remove them and use a wire brush or an aerosol cleaner to remove deposits, we do not recommend trying to clean O2 sensors.

Do all O2 sensors have same thread pitch?

the sizes are different the threads are not..they are all course (sp?) threads..

What size are most O2 sensors?

Registered. 7/8″ (22mm). Many times the O2 sensor will be bound pretty tightly, an open end wrench will most likely round off the hex.

Can seafoam help O2 sensors?

Use a bowl of sea foam cleaner to soak the O2 sensor. There is foam cleaner available at your local auto parts store, if you wish. Overnight, let the O2 sensor sit in the cleaner. Once this happens, the cleaner will be able to penetrate and break up any existing deposits that might still be in there.