How often do you replace condensate neutralizer?

How often do you replace condensate neutralizer?

twice a year
As a general rule of thumb, you should change condensate neutralizer media approximately once or twice a year.

Is a condensate neutralizer necessary?

Non treated condensate will damage and destroy cast iron, galvanized, copper and other types of metallic piping. If it is going into your septic system, then you run the risk of destroying the bacterial environment which is crucial to a properly operating septic system.

What is a condensate neutralizer kit?

A condensate neutralizer is a tank or a vessel, which is installed in line with a condensate drain from a condensing boiler, water heater or furnace (before it enters the sewer). It’s filled with media which raises the pH level of the condensate, making it safe to discharge into the sewage or septic system.

How long does condensate neutralizer last?

How Long Do Neutralizers Last? Condensate neutralizers can last many years without needing to be serviced apart from replacing the media. We are so confident in our Fireside condensate neutralizers that we offer a 10-year warranty on our units, which is the best in the industry.

Do you need a condensate neutralizer on a furnace?

All high efficiency furnaces create acidic water as a by-product of the combustion process, so it’s best to install a condensate neutralizer before corrosion causes damage to your pipes, septic system, or sewer system.

How do you neutralize acidic condensate?

The steps that happen during neutralization are:

1. Acidic condensate leaves the high-efficiency appliance and slowly enters the neutralizer.
2. Condensate makes contact with the media and “soak time” begins.
3. The media neutralizes the condensate and raises the pH level to between 5.0 and 9.5 pH.

What is an acid neutralizer?

An acid neutralizer system consists of a tank filled with calcium carbonate. As the acidic water passes through the bed of calcium, it safely and effectively corrects the pH level to neutral. Once neutral, your water will no longer dissolve copper from your pipes, damage fixtures and leave stains.

How long does an acid neutralizer last?

Acid Neutralizers are the most efficient and most economical way to eliminate acid water. They’re easy to size based on the water’s pH and the number of people in your home. And, they’re simple to install, plus only require minimal maintenance every 6 to 18 months.

What is condensate neutralizer made of?

The most common material used is limestone or a limestone product. There are two important factors when considering condensate neutralizers – the percentage of calcium carbonate and the amount of surface area of the media. Look for products containing: A minimum of 90% calcium carbonate.

Is a condensate neutralizer required by code?

THE CONDENSATE NEUTRALIZER SUPPLIED WITH THE EVO APPLIANCE IS NOT REQUIRED BY CODE IN MOST JURISDICTIONS; HOWEVER, FAILURE TO USE AND MAIN- TAIN WILL RESULT IN DAMAGE TO MATERIALS IT COMES IN CONTACT WITH AFTER LEAVING THE EVO DRAIN CONNECTION.

What is the best acid neutralizer?

If the pH is as low as four, the only acid neutralizer you can use is caustic soda. With an alkalinity level of 14 (the highest alkaline value), caustic soda is the only thing potent enough to move the acidity out of so low a range.