What size are Honda brake lines?

What size are Honda brake lines?

Registered. Alright, found exact information i needed -the size of the line used in honda’s for brakes is 3/16ths and the male fittings are 10×1.

What size are brake line fittings?

The two most common brake lines found are 3/16″/4.75mm and 1/4″. The smaller size is 3/16″/4.75mm brake line, CNF-3; and the larger size is 1/4″, CNF-4. 3/16″ is found on virtually all cars and trucks made in the world.

What size is brake line nut?

Brake line wrenches (flare nut wrenches or simply line wrenches) serve a specific purpose. Domestic cars often use 7/16-inch and imports 10 mm. Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox.

Are brake line fittings metric or standard?

Brake line fittings – Yes, you need metric.

What size are Honda Civic brake lines?

Re: Drum Brake Brake Line size Should be 3/16th line and m10 fitting, you need bubble flares.

What size are the brake lines on a 2002 Honda Accord?

Lines – To – Go Included in Set: 1 Master Cylinder Primary Brake Line 3/16″, 1 Master Cylinder Secondary Brake Line 3/16″, 1 Left Front Brake Line 3/16″, 1 Right Brake Line 3/16″ (in 2 easy to install sections), 1 Right Front Brake Line 3/16″, 1 Left Rear Brake Line 3/16″, 1 Right Rear Brake Line 3/16″.

How do you tell what size an fitting you have?

As mentioned earlier, you can always identify AN fittings based on the male thread size (outside diameter). These sizes are constant regardless of brand, hose type, or fitting configuration. If your fitting has a convex 37 degree flare at the end, the threads will tell you the AN size (and vice-versa).

What size is the nut on 1/4 in brake line?

ASD Brake Line Tube Nuts For 1/4″ Tube (7/16″ – 24 Thread, Inverted Flare, Long) (Pack of 5)

What are brake line fittings called?

Brake Line Fittings are sometimes called tube nuts or flare fittings.