Are OMC Cobra outdrives good?
The OMC Cobra is actually a good drive. The downfall and bad reputation can often be contributed to misadjusted shift cables, engine idle too high, and inoperable ESA switches. They require a tech who knows what they are doing when these are set up.
Who makes Cobra sterndrive?
OMC Sterndrives In the mid 80’s OMC or Outboard Marine Corporation introduced the OMC Cobra, a sterndrive that was modeled after the leading Volvo outdrives.
How do I know if I have an OMC sterndrive?
The model and serial numbers of the vertical drive should be located on the engine model and serial number plate. If the vertical drive model and serial numbers are not recorded with the engine model and serial number, they can be found on a plate located on the vertical drive.
How do you fill a OMC Cobra outdrive?
- Step 1: Place the drive in a vertical position. Place the drive in a vertical position.
- Step 2: Remove the fill plug.
- Step 3: Fill the drive with OMC Hi-Vis gearcase lubricant.
- Step 4: Frequently check gauge while filling.
- Step 5: After drive has been run, recheck oil level.
What happened to OMC Marine?
Outboard Marine Corporation (OMC) was a maker of Evinrude, Johnson and Gale Outboard Motors, and many different brands of boats….Outboard Marine Corporation.
|Industry||Marine Outboard Motors and Boats|
|Founded||1907 in Milwaukee, Wisconsin, United States|
|Defunct||December 22, 2000|
|Headquarters||Waukegan, Illinois , United States|
What is a OMC Cobra engine?
The Cobra is the sterndrive product manufactured by Outboard Marine Corporation (OMC). It came about when previous patents for the Volvo engine parts that were used expired, and a redesign was mandated. There have been several versions of the drive, offering various capacities and correcting for previous issues.
What is an OMC engine?
Refers to your outboard’s model/ serial number. OMC itself stands for the Outboard Marine Corporation, which was previously the world’s largest manufacturer of outboard motors – overseeing brands such as Evinrude and Johnson.
What is a stringer drive?
They mounted the engine and sterndrive on the stringers of the boat; the drive was sealed to the transom with a large rubber diaphragm. The OMC stern drive was then referred to as the stringer mount drive or “stringer”. The Mercruiser and Volvo sterndrive designs utilized U-joints to allow the drive to tilt and turn.
What kind of oil goes in a OMC outdrive?
OMC Cobra engines must use straight 30W oils. Multi-viscosity oil cannot be used.
What is OMC oil?
Oil Marketing Companies (OMC) An Overview.
Who bought Evinrude?
In 2001, Bombardier acquired the Evinrude and Johnson Outboards brands; the FICHT technology was reengineered into E-TEC direct injection.
Who bought out Johnson boat motors?
Bombardier Recreational Products
It has been owned since 2001 by the Canadian firm Bombardier Recreational Products. Bombardier stopped selling outboards under the Johnson brand after 2007, and moved all sales entirely to Evinrude Outboard Motors until they were discontinued in June 2020.