Can I drill into the side of a fridge?

Can I drill into the side of a fridge?

Drilling into side is not safe. A coolant tube may or may not be there, but you will mess up the thermal insulation for sure, creating dew point and similar problems.

What happens if you pierce the inside of a fridge?

A freezer puncture is a big problem: it causes your freezer to malfunction, the temperature to fluctuate and all that food to spoil.

Should there be a gap between fridge and wall?

The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.

What is in a fridge door?

The refrigerator’s outer box/cabinet is made of a thin layer of aluminum steel and metal. This is typically the same material used for the refrigerator door, which explains the seamless and matching outer exterior.

Where are the Freon lines in a refrigerator?

Refrigerant lines look like copper tubing and are usually mounted on all sides of a fridge except the doors. The lines are usually mounted just outside of the plastic liner of the unit, in between that liner and the insulation layer.

Where do refrigerant lines run in a fridge?

How do you drill a refrigerator?

using a small diameter drill bit (pop rivet bits are the best) set short in the drill chuck, drill a hole just through the outer skin of the fridge. Then using something like a metal meat pin skewer gentle push through to the inner fridge wall.

How much space should be between side wall and refrigerator?

Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.