How do I make tab top kitchen curtains?

How do I make tab top kitchen curtains?

Instructions

1. Cut the Panel Fabric. The length and width of your curtain panels will depend on the size and placement of the windows, plus the hem allowances.
2. Determine Tab Length.
3. Cut ‘Em Out.
4. Finish the Panel Edges.
5. Attach the Tabs.
6. Attach the Facing.
7. Press the Facing.
8. Sew the Facing.

How are tab top valances measured?

How to Measure: Tab Top Curtains

1. MEASURE LENGTH. Measure from the top of the rod down to where you want the curtain to fall.
2. MEASURE WIDTH. The curtain width should measure 1 ½ the width of the window for fullness.
3. STYLING TIP. We suggest a decorative curtain rod because the rod will be visible between tabs.

How far apart should tabs be on tab top curtains?

Account for about 5″-7″ of space between the tabs. These tabs will have a little over 6” in between. Facing Piece: Cut a piece that is 2″ wider than your finished curtain width and about 3” to 5″ high. This facing piece will go on the back of the curtain to cover the unfinished edges when the tabs are sewn on.

How long are the tabs on curtains?

Each tab will be eight inches long, and you’ll be spacing the tabs every six inches along the top of the curtain. To find out how long the tab piece needs to be, multiply the number of tabs by eight.

How do you calculate tab top curtains?

Measure from the top of the tab to the top of the curtain for the finished tab length. Multiply the tab length by 2, subtract 2, and divide the result by 3.14 for the maximum diameter rod you can use for the tabs. Measure from the bottom of the tab to the bottom hem of the curtain for the curtain panel body length.

How do you measure drop for tab top curtains?

Tab Top curtains should be hung from curtain poles. Simply measure between the finials (the decorative ends) to obtain the width. Drop: Measure from the centre of the top of the pole to where you want the curtains to finish.

How far apart are back tabs on curtains?

6″ between the tabs is often recommended for a nice drape and gather. Each of my finished panels are about 53″ wide and we did a total of 7 tabs per panel.

What is curtain slide tape?

Product Description. Curtain Slide Tape allows curtain rings to slide easily across the curtain rod. Spans joint in rod: Prevents rings from getting stuck at the joint in telescoping and extension curtain rods.