How strong is a NEMA 23 stepper motor?
This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque of 19 kg-cm (270 oz-in).
What voltage is a NEMA 23 stepper motor?
2.3V
Nema 23 Stepper Motors 10kg/cm, Voltage: Rated Voltage 2.3V
| Voltage | Rated Voltage 2.3V |
|---|---|
| Model Name/Number | Nema 23 |
| Motor Type | Stepper Motor |
| Torque | 10kg/cm |
| Dimension | 57mm x 57mm |
What is the max rpm on a NEMA 23?
400 rpm
A large stepper motor, this NEMA 23 is strong enough to move large loads that undergo a lot of variation. This stepper can be used with all SlushEngine models. It provides 1.3 N.m of torque and can travel up to 400 rpm.
How much weight can a stepper motor lift?
As long as the motor overcomes friction forces there is no limit how much weight it can rotate. It will just accelerate slowly untill it reaches an equilibrium with the friction forces. A total weight of 5-7 Kg or so is a lot – I doubt that simple servo can handle it.
How much voltage does a stepper motor need?
Generally, 12 [V] is the smallest voltage used to drive actuator motors, with higher voltages at 24 [V], 48 [V] and even 80[V] being used for motion control systems. A good rule of thumb is to use between 10 and 24 times the motor’s nameplate voltage for the system bus voltage.
How fast can you drive a stepper motor?
If you want to know about stepper motor max speed, you should know that the maximum speed that’s typical of a stepper motor is 1000rpms while the max speed of gearmotors comes in at 400-550 RPM. That said, the speed of any stepper motor depends on the specifications of the controller that comes with it.
How do you determine the maximum rpm of a stepper motor?
RPM = a/360 * fz * 60 Example 1: Drive step resolution is set for 1000 steps per revolution. Example 2: Drive step resolution is set for 500 steps per revolution. With input frequency of 1000hz, . 72 / 360 * 1000 * 60 = 120 rpm.
What is the maximum torque of stepper motor?
High Torque Stepper Motors range from 0.01 to 50Nm by JVL.