How do I fix error 5B01 on my Canon printer?

How to Fix Canon Printer Error 5B01

The printer is turned off and the power cord attached.
Press the RESUME button for 2 seconds, then press the POWER button until the green light is on (when pressing the POWER button, do not release the RESUME button)
Then release the RESUME button, but don’t release the POWER button.

Why is my Canon printer printing error?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.

How do I reset my Canon Pixma MP230 printer?

While holding the ON button, press and release the STOP/RESET button 4 time, then press and hold the STOP/RESET buttons, then release both the ON and STOP/RESET buttons together (for MP230, MP235, MP236, MP237, MP280, MP287, MP288, MP495, MP497, MP498).

How do you clean a Canon ink absorber?

Take a bowl with warm water and add some soapy material.
Open the ink cartridge compartment.
wait for ink cartridges and disconnect the printers power cord.
Look balck rubber frame under the ink cartridge.
pull the rubber frame out of the printer and remove ink absorber pads.
clean the pads in the bowl.

How do I update my Canon printer driver?

Update the firmware

Turn on the printer.
Make sure the printer is connected to the Internet.
Press MENU, select Setup, and press OK.
Select Device settings and press OK.
Select Firmware update and press OK.
Select Install update and press OK.
Select Yes and press OK to confirm that you want to update the firmware.

How do I update my printer driver?

Update your driver in Device Manager

Press the Windows key and search for and open Device Manager.
Select the printer that you’ve connected from the list of available devices.
Right-click the device and select Update driver or Update driver software.
Click Search automatically for updated driver software.