How do I fix the code on my Cabrio washer?
Simply put, too much detergent was used and an excessive amount of suds or foam was produced. Adding an additional rinse cycle without adding any more detergent might fix this problem. Sometimes the machine will automatically detects this problem and add a pause and additional rinse cycle in order to break up the suds.
Why does my washing machine keep saying uneven load?
A front load washer is much heavier and larger than its top load counterpart. An out-of-balance condition can result from an unlevel machine, or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control.
Why is my Whirlpool washer unbalanced?
The counterbalance springs help to absorb the movement of the washer tub. If a spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the counterbalance springs to determine if any of the springs are broken. If a counterbalance spring is broken, replace it.
How do I reset my Cabrio washer?
Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.
What does the code uL mean on a Whirlpool Cabrio washer?
unbalanced load
If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.
How do I fix my UL washing machine?
If your washer’s dial is blinking and the drum stops spinning, the first thing that you can do to get rid of the UL error message is to rearrange the wet items inside the drum, then close the lid and restart the spin cycle.
Why does my Whirlpool Cabrio keeps saying uL?
If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.
How do I fix my uL washing machine?
Why does my Whirlpool Cabrio keeps saying UL?
How dO you fix an unbalanced washing machine?
How to Fix an Unbalanced Washer (in 3 Steps)
- Step 1: Adjust the washing load. When placing washing inside the washer, it is important to make sure the clothes are evenly balanced in the drum.
- Step 2: Check the surface. Washing machines should sit on an even surface to work properly.
- Step 3: Adjust the washer’s feet.