How do I start my Fisher and Paykel dishwasher?

How do I start my Fisher and Paykel dishwasher?

To activate, press and hold until you hear two beeps (5 seconds). The light above the button will glow steadily. To cancel, press and hold until the light above it goes out. Keep this document handy for easy reference.

What model is my Fisher and Paykel dishwasher?

Serial label located on the back of the product. MODEL NUMBER SERIAL NUMBER Page 3 Serial label located inside cabinet, underneath drawer. Serial label located inside product on the left hand side of the door. Serial label located inside cabinet, underneath the top drawer.

How do I turn off the Fisher and Paykel drawer dishwasher?

Double models:

1. Press. to turn the dishdrawer on.
2. Press and hold. to turn the dishdrawer off.

Where do you put the detergent in a Fisher and Paykel dishwasher?

Filling the Detergent Dispenser

1. Press the latch down to open the dispenser.
2. Check that the dispenser is empty and dry, then add detergent (do not place solid tablets in the dispenser). No detergent is needed for the Rinse program.
3. Close the dispenser until it clicks shut.

Can I use tablets in my DishDrawer?

Solid Dishwasher Tablets You may see other, equally suitable types of dishwasher detergent on the shelves of your supermarket. Read and follow the detergent manufacturer’s recommendations. If the Cutlery Basket is not being used for a particular load, place tablet in the bottom of the drawer.

How do I change the settings on my Fisher and Paykel dishwasher?

How to Change the Setting of an Option

1. Check. Check that there is no wash underway, then open the drawer.
2. Enter Menu. To enter the menu: Press and hold the and. together for four seconds.
3. Scroll to Option. Press. to scroll to the next option.
4. Change Setting. Press.
5. Save Setting & Quit Menu.

Why does my Fisher and Paykel dishwasher keep beeping?

Check if the water supply has been turned off or the wash program interrupted. once to stop the beeping, and then again to clear the fault. Run the sanitize cycle again.

What model Dishdrawer do I have?

Located on the left hand side of the appliance, underneath the top drawer and hidden when closed.

Where is the product code on Fisher Paykel dishwasher?

Serial label located on the back of the top panel. Depending on Model, either: Serial label located at the top of the door frame when the door is opened. or Serial label located on the back of the chassis. Serial label located on the inside of the door or on the back of the product.

How do I cancel my Fisher and Paykel dishwasher cycle?

To cancel: press and hold until you hear another tone and the keylock indicator stops flashing and goes out. together until you hear another tone and the keylock indicator stops flashing and goes out. Off/On Press to turn the dishdrawer on or off. Opening the drawer will automatically turn the dishwasher on.

Can you just put dishwasher tablets in the bottom?

Detergent tablets should always be placed in the detergent dispenser compartment. If you’re placing the tablet at the bottom of the dishwasher it’s likely that it will dissolve too quickly, releasing the detergent during the prewash and leaving no detergent for the main wash cycle.

Are Fisher and Paykel dishwashers good quality?

Our dishwashers feature quality materials, sleek finishes, and technologies that have been refined over many years as Fisher & Paykel set the benchmark for in-draw dishwashing. Over two decades of quality assurance, our revolutionary DishDrawer™ Dishwasher has been put through more than a million test cycles.

How do you refill the rinse aid dispenser on a dishwasher?

If using a tablet or gel pouch, place it in the cutlery basket (B) or at the edge of the base rack (see user guide for details). If the indicator on its plug (C) glows bright red, refill the rinse aid dispenser (D) with liquid rinse aid.

How do I find the spare parts Manual for my appliance?

CLICK HERE. Select the product category of your product. This will help getting a quicker and more accurate result. The Appliance Product Code uniquely identifies the Spare Parts Manual for your specific appliance.

How do you turn on a Whirlpool dishwasher?

To start wash: Close the drawer and press OR Press on the control panel before closing the door To set delay start: Press and hold to set the delay start time, then close the drawer. Note: Each tone indicates a 1h delay. Opening the drawer will automatically turn the dishwasher on.