How do you fix a Tobi steamer?

How do you fix a Tobi steamer?

If your Tobi stalls during use, a circuit overload may be at fault. Check your fuse box for a blown fuse, and replace fuses as necessary. Remove any other high-wattage devices from the same circuit as the steamer. If you’re using an extension cord to power your Tobi, make sure the cord is rated at 15 amps.

Why has my steamer stopped steaming?

The steamer does not produce steam or produces only intermittent steam. Mineral deposits can clog a clothes steamer over time. This common situation may cause the steamer to stop producing steam because it is clogged with mineral deposits. The most common culprit is calcium deposits that build up over time.

Why is my steamer dripping?

If you have been using your stand steamer heavily for a long time, this can cause water condensation. If this happens, water will drip from the head. To solve this, first let your steamer cool down. Then, remove the grill and press a dry cloth against the black surface to remove the condensed water.

How do you service a steamer?

Follow These Steps

  1. Fill the reservoir with one part white vinegar to two parts distilled water.
  2. Let the water cool down completely, then empty the steamer.
  3. Repeat the process as needed until the clog is fixed or the mineral deposits are gone.

How long does it take for a Tobi steamer to heat up?

Once plugged in, the Tobi steam iron should be ready for use in 30 seconds. Basic care and maintenance should keep the steam iron working well for a long time, but if problems occur, perform troubleshooting steps to identify and potentially resolve the issue.

Can steam cleaners be repaired?

Regular maintenance on your steam cleaner will keep it performing efficiently and help you to avoid expensive downtime. Steam Cleaner Repairs & Replacements: Clean Sweep Hire will replace broken parts on your steam cleaner. This includes vacuum system and water tank checks.

How do you Decalcify a garment steamer?

With regular use, your garment steamer should be descaled every 2 weeks.

  1. Fill the water tank and plug in the steamer near a sink.
  2. Point the steamer head into the sink. Press and hold the AUTO CLEAN button for 2 seconds.
  3. Wait 2 minutes until the steamer shuts off and the AUTO CLEAN light goes out.

What happens when you overfill a steamer?

Overfilling the water tank can prevent your steamer from working properly. When steaming in a low position you should periodically raise and straighten out your hose. Not doing so can cause condensation accumulation and will create a gurgling noise.

Can I put vinegar in my clothes steamer?

A clothes steamer can easily be cleaned with a vinegar and water solution. Mix one third white vinegar with two thirds distilled water in the steamer tank and let your garment steamer run until empty. The vinegar will remove any build up that was causing your steamer to stop working.